you have 0 items in your cart
IrDA Infrared IR PCB Module Kit (IRM-03A)
ProductTitle ProductTitle

IrDA Infrared IR PCB Module Kit (IRM-03A)

$24.00

Quantity:
Availability: 20 available

irda pcb module


IrDA Infrared Module Kit (IRM-03A)

The Module Kit is basically the IR Drive without the drive bay mounting frame. It facilitates inexpensive and easy integration to a desktop computer without installing additional third-party software driver. As long as your motherboard has an IrDA header pin and you enable this port in your BIOS setup screen, Windows 98/Vista/7/8 will automatically install a native IrDA driver for you.

Got 64-bit system ? No problem, that's supported, too.


Electronic / Testing Application: This Kit is also ideal to complete your TI IC project where your chip has an IrDA interface port but you need the actual photo transceiver such as this one to complete the infrared interface.





A close up picture of the Infrared Drive module unit. The module is easily mounted to a case by attachment of 2 standard case screws.



click on image to enlarge



The Infrared Drive module kit includes

Infrared Module


Individually-pinned IR Cable



2 mounting screws





If you prefer to secure this IrDA module to your PC system, there are many ways to do it. Here are a few examples:




Installation Reference #1
Install IR module onto an unused 3.5" drive bay cover.

Drill 2 holes 1 5/8" apart so you can attach the IR module to the drive bay cover given the right use of screws, nuts, and standoffs.
Then drill 3 holes to expose the transmitter, receiver, and visual LED bulbs.



Attach the included IR Cable to the IR Module. Then apply the drive bay cover back onto the unused drive bay.

Your computer now has a built-in IrDA port !





Installation Reference #2
Install IR module to a case's front bezel



This PC case comes with a stylish plastic oval-shaped IR window designed to house an infrared module.



Remove the front panel from the case and secure the IR Module to the back of the IR window.

Your computer now has a built-in IrDA port !







Installation Reference #3
Install IR module to an add-on card slot cover


Install IR module onto an expansion slot backplate for either a PC or 19" rackmount server.



There is no hole to drill. This backplate used here was an expansion backplate for an old IDE card. The original COM port cable is easily removed from the plate by using a plier and a screw driver. Secure an IR module to the backplate using the left-over screws, nuts, and standoffs from the accessory kits that came with a case.



Attach the included IR Cable to the IR Module. Then secure the assembly to an open slot.
Your PC or 19" rackmount server now has a built-in IrDA port !







Installation Technical Reference