you have 0 items in your cart
SHARK TECHNOLOGY 600W ATX12V V2.0 Power Supply, 120mm Fan 8-pin (4+4) 12V Plug
ProductTitle ProductTitle ProductTitle ProductTitle ProductTitle

SHARK TECHNOLOGY 600W ATX12V V2.0 Power Supply, 120mm Fan 8-pin (4+4) 12V Plug

$49.99

Quantity:
Availability: 17 available

SHARK 600W ATX12V V2.0 atx600n12s

ATX-600-N12S

600W ATX12V V2.0 Power Supply

    i7

3 lines of cables to reach drives anywhere in the case

Now supports motherboards
with 8pin or 4pin 12V connector
 

SHARK TECHNOLOGY
® ATX-600-N12S 600-Watt power supply is equipped with a large 12cm (120mm) fan that provides stronger airflow at a low 1200 RPM and thus dramatically reduce the power supply fan noise when operating under heavy load. Now supports newer motherboard with 8pin 12V motherboard power connector as well as standard board with 4pin 2x2 12V power connector. Legacy 20pin as well as current 24pin motherboards are supported using an innovative detachable connector design.

3x SATA and 3x PATA Molex power connectors are laid out each on 3-separate lines of cables to easily reach drives located not next to each other.




atx-600-n12s

  • Supports Intel Pentium III, IV, Core systems
  • Supports AMD based systems.
  • Quiet Operation
  • Reliable, cool-running and will not overheat
  • Meets standard ATX specifications
  • Fits all standard ATX PC chassis and most Dell/HP cases
  • Multiple lines of cables to support drives located not next to each other



  • atx600n12s
    NEW Better Mechanical Design:


    Large 120mm fan draws massive amount of hot air in from the CPU into the power supply and exit out to the back of the PC system. Since the fan is situation inside the system, and not at the back of the PC system, audible fan noise is greatly reduced.





    Power Connectors

    (1) 24pin Main Power Connector
    (sub module detachable to support 20pin board)

    (1) 8pin Motherboard 12V Power Connector
    (sub module detachable to support standard 4pin 12V board)
    (3) PATA Molex Peripheral Power Connectors
    (on 3 separate lines of cables to reach drives located in various part of the case)
    (1) Floppy Drive Power Connector
    (3) SATA Power Connectors
    (spread out on 3 separate lines of cables to reach drives located in various part of the case)

















    ATX-600-N12S


    Technical Specifications

      AC INPUT
      115V/230V - 60/50Hz
      DC OUTPUT
      +3.3V
      +5V
      +12V
      -12V
      +5VSB
      600W
      Max
      Combined
      Peak Watts
      31A
      42A
      24A
      0.8A
      2A
      600W
  • Maximum Power Output: 600W
  • Single rock solid 12V output
  • Emergency Manual shut-down rocker switch
  • Mesh fan-guard for improved child safety protection
  • Input: 100-127V AC or 200-240V AC - selectable by switch
  • Efficiency: Typical 65% @ full load
  • Dimension: 5.9"(L) x 5.5"(W) x 3.4"(H)


  • Complete 5*Startm system protection:
    • Over Voltage Protection
    • Under Voltage Protection
    • Over Current Protection
      • Short Circuit Protection
      • Over Power Protection